Popular Posts
-
Calibrating the M-boards is the major part of the adjustment procedure: All in all 320 trimpots on 16 voice boards will have to be turned. T... -
After one of my IG00150s failed and has been replaced by another one I gave it to my friend who was curious about analyzing. He was sending ... -
Since I picked up my CS-80 from the former owner in 2007, the only calibration I did was just adjusting the pitch. Until now I have been... -
In this article I have gathered some general information around setting up the calibration, as well as sharing some tips . Updated Adjust... -
During calibration on one M-board all of the sudden the pitch went down while adjusting, resulting in a slow beating coming out of the speak... -
If one of your IG00150 has gone bad there is an alternative to get a "spare" from a lesser used module in your CS-80: The chorus... -
To work on the KAS and SH Board the keyboard has to be lifted. Click here for further information about which screws have to be remov... -
Since I own the Elka Synthex, its fan's noise always got on my nerves. The fan's motor sound is kind of wobbling accompanied by so... -
The first step is adjusting the power supply. Be aware that once you adjust something here, there is no way back because it will affect in s... -
Back in 2007, shortly after I picked up my Yamaha CS-80 I was looking for MIDI options and was glad to see that Kenton still sells the Midi...